Model GR 50
|
|
Readily mounts to light and medium trucks, attaching to the front bumper with braces to the frame. It is rigidly constructed of heavy angle iron, welded to box uprights with combined angle and channel cross braces. Recommended for models 101, 112, 120, and 701. |
 |
Model GR 52 | |
Mounting configuration is for 3 to 10 ton trucks equipped with an extended front frame and power take-off. The hitch has an extra heavy-duty rating and will accommoidate any model snowplow. |
 |
Model GR 100 |
|
Adjustable bumper angle and axle clamp adjustments fit various truck models. Constructed of 4" channel iron, the hitch is mounted to the front bumper where the plowing thrust is transmitted to the truck frame. Axle clamps have springs, minimizing shock to truck. Not recommended for 721 plow. |
 |
Model GR 200 |
|
The bumper angle and axle extension channel are adjustable to fit various truck models. A unique design of the axle clamp allows free movement of the front axle while providing the strength required. This hitch is bumper mounted, for a push force to the truck frame. Constructed of four inch "H" beam. Used with all snow plow models. |
 |
Model GR 300 |
|
Designed for medium and large weight trucks (3-10 tons). Also for four and six wheel drive trucks. Constructed from heavy four inch "H" beam, reinforced with 1/2" and 1/4" gussets. Front bumper mount. Multiple brace arms transfer the load to the truck frame. Used with all snow plow models. |
 |
Model GR 400 |
|
This hitch transmits plowing thrust to the frame in front of the rear wheels. A unique design prevents the thrust from being transmitted to the front axle even though the weight of the plow is carried on the axle. Built from heavy "I" beam. Used with all snow plow models. |
 |
Model GR 500 |
|
Designed for quick hook-ups. Operator can hook up plow from truck cab since no pins or lift chains are used. Used with all snow plow models. Available in 29" or 34" lengths. |
 |
Model GR 550 |
|
This bumper-to-axle mount hitch is retractable and used on trucks having cabs that tilt. The bumper remains stationary. Plowing thrust is transmitted to the truck frame. Axle clamps have shock springs minimizing shock to truck. Recommended for all plow models. |
 |
Model GR 600 |
|
This front bumper mounted hitch is retractable and is used on trucks having cabs that tilt. The bumper remains stationary. Plowing thrust is transmitted to the truck frame. Axle clamps have shock springs minimizing shock to truck. Not recommended for Model 721 plow. |
 |
Model GR 650 |
|
This bumper-to-frame mount hitch is retractable and is used on trucks having cabs that tilt. The bumper remains stationary. Plowing thrust is transmitted to the truck frame. Recommended for all plow models. |
 |